Finsecur Baltic 512 TYPE A - Multipoint Detectors Ref: MISTRA 200

01-ECMSI-NT002.Rev B40
Multipoint detectors ref: MISTRA 200
BALTIC 512 TYPE A WALL OR RACK BOX CONTROL AND SIGNALING EQUIPMENT 512 POINTS
30
1 detector per line max. of the
line (1000m)
End of line resistor
Entrance 1 Entrance 2
Alarm Resistance
FIRE 2 FIRE 1 PRE TO FAULT
FIRE 2 FIRE 1 PRE TO FAULT SPARE
Entrance 3 Entrance 4
RS485 2A RS485 2B
SCREEN 2
Entrance 5
All of the
Mistral 200
connected to a
only FI-AT
must not
monitor a more surface
of 1600m²
RS485 1A RS485 1B SCREEN 1
Entrance 6 Entry 7
GND EARTH +24V
GND EARTH +24V
Entry 8
EAE/AES
24V
-
(NFS 61940)
(EN 54-4)
+
brown black red gold
connection Cable to be used for connecting the linear detector
RA= 1 kOhms 1/2
230VAC
FIAT<->Mistral
Section(min.) Kind
1 pair - 8/10th without screen C2 (non-propagator)
brown black orange gold
RFL= 10 kOhms 1/2 W
Section(min.) Kind
2 x 1.5mm² CR1 (fire resistant)
AES<->Mistral