01-
ECMSI-NT002.Rev B40
GENERAL PRESENTATION
Addressable
control and signaling equipmentBaltic 512is
designed to meet the requirements of category A fire
safety systems (SSI) with type 1 alarm equipment (EA). It
is installed in establishments with a sleeping area and in
all those presenting a particular risk.
ThereBaltic 512has a choice of 8 open buses of 32 points
or 4 "re looped" buses of 128 points.
The addressable ECS can manage addressable automatic
fire detectors
and manual call points, standard sounders
or autonomous sound alarm units (BAAS) and signaling
report boards.
It includes addressable control and signaling equipment
(ECS) with 512 detection points using automatic detectors
or manual call points in accordance with NF EN54-2 and
54-4 standards and a fire safety centralizer (CMSI)
consisting of a unit alarm management (UGA) and 3
configurable safety functions in transmission or current
failure
with or without position control.
There
Baltic 512innovates by its operation under a voltage of
12V. A backup battery is sufficient for the secondary power
supply of each system (ECS and CMSI).
The ECS has
a standby time of 72 hours.
The configuration
of the ECS, CMSI and UGA is carried out by PC via
USB or RS232 (Baltic PC software).
In
accordance with regulations, these two systems have
functional independence (separate power supplies).
v
Main
Features
Ability
Maximum number of detection circuits 8 open lines or 4 looped lines
Maximum
number of points on a detection circuit 32 on open line or 128 on looped line
Maximum number of detection zones 512 detection
areas
Maximum
number of points on the ECS 512 dots
Nbr
of ZA per UGA 1
Maximum number of fire protection
functions 3
Maximum
number of actuated safety devices (DAS) 96
Maximum
number of terminal controlled devices (DCT) 176
Feature
Compartmentalisation, smoke extraction and evacuation by
broadcasting the evacuation signal (UGA)
Secured
With break and current release, with and
without position
control, in 24 and 48 V.
DAS management
Remote
control line management 3
Sound
diffuser line management 2
Max
power
By
remote control line 55 watts (24 or 48 V)
8.4 watts (12V
internal AES)
24 watts
(24V external AES)
48 watts
(48V external AES)
48
watts (external 24 V AES via E\I2P interface) 96
watts (external
48 V AES via E\I2P interface)
Per
line of sound/light diffuser
Safety
rules
This
equipment is intended to be connected to the 230 V public distribution network.
I
In order to avoid any risk of electric shock, any INTERVENTION must be carried out WITHOUT VOLTAGE (upstream
bipolar circuit breaker open) and only by QUALIFIED PERSONNEL.
CONTROL
AND SIGNALING EQUIPMENT 512 POINTS BALTIC 512 TYPE A WALL OR RACK BOX
7
To Next Page
Loading...