Main window
From the FireClass Console main screen, select "File"
and then "New", to display the window as shown in figu
-
re 18 where you can select the Firmware Release of the
Control Panel to program. Click on the green tick to ac
-
cept the selection. The following sections describe the
File, Tools, and Help menus.
n
Icons description
Ø
Click on this icon, opens the window in Figure 17
"Panel Details" where you can check/insert various
programming.
Ø Click on on this icon in the window shown in Fi-
gure 21, you can see the details of the Panel, enter
the name and address of the Control Panel/Custo-
mer.
Ø Click on this icon to download the programming
(via serial link) to the connected control panel.
Ø Click on this icon to upload all the programming
of the connected Control Panel.
Ø
Click on this icon to select the Loop for inserting
devices.
Ø
Click on the icon to start operations in Real
Time. This feature allows you to view the status of
the FC501 control panel in real time on a computer
using the FC500IP module connected to the network
or using the serial port.
n
File menu
The menu File: New, Open, Save, Save as, Close,
Exit will allow you to manage customer account
data.
New
The New option creates a New installation
and assigns the factory default values to all pro
-
gramming parameters.
Open Click on “Open”, to retrieve a previously sa
-
ved customer installation file. Locate the required
installation file and double click it to open it.
+
You can have more than one installation file
open at the same time. Pay attention to the tabs
on the left-hand side to ensure you are editing
the correct file.
Save If the installation data is modified, click on “Save” to
save the changes to the current installation.
Save as If you have created a new installation or want
to save an existing installation under a new name then
click on "Save as".
Close Click on “Close” to close the current installation.
You will be prompted to save any changes made.
Exit Click on “Exit” to close Fireclass Console. You will
be prompted to save any changes made to the current
installation.
n Tools menu
Language See paragraph "Select language" on page 29.
Skin To change the look of FireClass Console, click on
Tools and then "Skin" that allows to choose, in a list, the
available looks (see Figure 16).
Advanced In this section you can set the Tooltip du-
ration; Load the driver to use the USB. It is also pos-
sible to associate the files .FCI (files generated by
the programming/management of the fire system)
with FireClass console, so to open it just click on it.
Panel Details
Click on this icon , the window in figure 17, will be
shown, where we have the following menu tabs:
30 Addressable Fire Panel FC501
Figure 17 Control Panel Details window.
Figure 18 From File menu and then "New".
Figure 19 Firmware Update window
To Next Page
Loading...
