In reference to the point 0) "EXTRA", at the first panel po
-
wer-up and/or at the end of the FW upgrade process of
the control panel, only a language can be loaded overwri
-
ting the second languages previously present (the first will
be the English). The available language will be contained
in a file of a dedicated folder on a USB stick connected to
the control panel before first Power up.
This loaded language will be the language of the control
panel. If the USB stick is not present at the first panel
power-up, the system will propose the default langua
-
ge: Italian and English (see figures 52, 53).
In the case of FW UPGRADE of the control panel, at the
end of the FW upgrade process, the panel will start the pro
-
cedure "Language strings download via USB key at the first
panel power-up", (see figure 53) in order to allow the load
again the right version of the required language.
8 KEY -SYSTEM
The option SYSTEM in the programming menu activates:
- the system language selection page (Display langua
-
ge) see Figure 54.
+
Other languages can be loaded from software
After selecting the language, it is possible to program:
-PANEL ID
-PANEL TYPE (FC501-L/FC501-H)
-BATTERY TYPE (7Ah/12Ah/38Ah)
-DAY/NIGHT MODE or AUTO
-PREALARM TIME.
-COPY ON ZONE?
Alphanumeric keypad No function is related to the
Alphanumeric keypad.
Cursor Keys
No function is related to UP and Down
Keys.
Use the Right key to select the next option.
Use the Left key to select the previous option.
ESC Key
Use ESC key to cancel the operation and to
step back to MAIN page.
ENTER Key
ENTER Key accepts the selection.
In sequence:
n
Panel ID
Enter up to 4 digits to identify the configuration file
system, so it is possible to distinguish it from other con
-
figuration files (for example on a USB stick, it is possible
to load multiple systems without any configuration files
overlap). In sequence:
-PANEL TYPE (FC501-L/FC501-H)
-BATTERY TYPE (7Ah/12Ah/38Ah
n
Day / Night / Auto
The display for programming Day/Night/Auto mode will
be shown. If Automatic mode is choosen, it is necessary
to set the transition time from one mode to another.
+
See the LED Day/Night mode LED change status.
In sequence:
n
Pre-alarm time
Enter the Prealarm time in minutes (max 9).
The amount of Prealarm Time+Investigation Time sho
-
uld not exceed 10 min.
n
Copy on Zone?
Moving on the YES option using the Cursor keys it is
possible to copy the same Prealarm time in all the zo
-
nes.
9 KEY- Restore Default
The Restore Default option from the PROGRAMMING
menu will allow you to restore default setting.
Use the 9 Key to select Restore Default, the display
will show the Figure 55: in this phase:
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor Keys
No function is related to UP, Down,
Right and Left Keys.
ESC Key
The ESC Key cancels the procedure and re
-
turns to the previous page;
ENTER key
The ENTER Key starts the default settings
restore procedure.
PROGRAMMING FROM THE PANEL 55
System lev 3 : PROGRAM
Choose Language
ITA eng
LANGUAGE
^
Master Panel
Access Level
Control panel
Status
If blinking
the panel work
To Next Page
Loading...
