ENTER key: Accepts the programmed string and the
User Interface moves to the next programming parameter
page, if any, otherwise returns to the main page signalling
a local programming activity followed by a panel reset.
+
To program each parameters or options inside the
system will be used the same page that adapts it
-
self to the most appropriate program mode for the
parameter to program.
In the case of wrong value entered, the following mes
-
sage will be displayed for 5s (see Figure 33).
Main Page - Accessing the system
After the Control panel has been installed and powered
by the Mains (230V 50/60 Hz), the first time will prompt
to choose the language of the display, then the Main
Page will be shown as per Figure 35. In this phase:
Alphanumeric keypad
Key 1 brings the panel in the
“Program” or “Analyze” mode;
Key 2 brings the panel in the “Disable” mode or “View
List”;
Key 3 shows the events of the LOG or brings the panel
in the “Modify” mode;
key 4 selects between groups of related functions of the
keys 1,2, and 3.
Cursor keys
The UP Key: increase the brightness of
LCD display;
the Down Key: decrease the brightness of LCD display;
the Right Key: increase the contrast of LCD display;
the Left Key: decrease the contrast of LCD display.
ESC Key Exit from the main page, moves the User
Interface to Front page or event driven page, if any.
Pressing the key for more than 3s the panel will be for-
ced to access level 1.
ENTER Key No function is related to ENTER key.
+
When the panel starts its normal activity and no ac
-
cesses to the User Interface are sensed for a period of
30s, the User Interface leaves the Main page and rea
-
ches the Front page. For more features see the de
-
scription of the MAIN page in the User Manual.
Insert password
From the MAIN page by selecting 1 key “PROGRAM”
the panel will prompt the Installer password to operate
at Level 3;
the default installer code is 00000: every digit will be
hidden by *(star) symbol.
in this phase (see figure 36):
Alphanumeric keypad Use the Alphanumeric keypad
to insert the 5-digit password.
Cursor keys
No function is related to UP, Down,
Right and Left keys.
ESC Key If the entry field for the password is empty:
abort the enter password procedure and move back to
the User Interface to calling page, otherwise clear the
entered digits (clears the entry field).
ENTER key Accepts the password and starts the pa-
ssword verification process. If a Password is wrong or
missing, the screen shown in Figure 38 will appear.
To return to the previous screen, press the Esc key or
wait for 5 seconds.
PROGRAMMING FROM THE PANEL 45
1=Program lev.1 : ACTIVE
2=Disable MASTER PANEL
3=Modify SCANNING LOOP
18:50 27 - 17/10/12:
4=More
Access Level
If blinking
control panel
working properly
Current phase
Control panel status
Control Panel name
(It can be modified by User)
1=Analyze lev.1 : ACTIVE
2= ew istVi L MASTER PANEL
3=View Log
18:50 27 - 17/10/12
SCANNING LOOP
:
4=More
Figure 35 Main page window
FC501 Panel lev.3: PROGRAM
INSTALLER
Insert the Password
[____ ]_
Name of Control Panel
Field to insert the password
Control panel
Status
Access Level
If blinking
control panel
working properly
Figure 36 Insert password (Installer code).
FIRECLASS 501
FireClass
www.fireclass.net
Figura 37 Front page window
FC501 Panel lev.3 : PROGRAM
INSTALLER
Wrong Password
Figure 38 Display Wrong Password
To Next Page
Loading...
