FireClass FC501 - USB Language and Firmware Management

mory (previously downloaded from the CD supplied
with the panel or from the FireClass site), see the dia-
gram of operation in figure 52.
1) To load, from USB pendrive to panel, the AUDIO file
containing the voice messages.
2) To save, from the panel to USB pendrive, the curren-
te AUDIO messages.
3) To load, from USB pendrive to panel, the program
-
ming data (*).
4) To save, from panel to USB pendrive, the current pa
-
nel programming data.
5) To upgrade the panel Firmware from USB pendrive (**)
(***).
6) To save, from panel to USB pendrive, the current
LOG data in the panel.
Cursor Keys
No function is related to UP, Down,
Right and Left Keys.
ESC Key
The ESC key is used to exit from the USB
activity result page.
ENTER Key
No function is related to the ENTER Key.
+
(*) The loaded data will overwrite the current data
in the panel.
+
(**) The file containing the expected FW version to
upgrade the panel has to be present in the F_fw di
-
rectory in the pendrive.
+
(***)To do the firmware upgrade of the FC500 Re
-
peater and the MFI module is not possible using
the USB pendrive.
54 Addressable Fire Panel FC501
Fc501 Panel lev.3 : PROGRAM
access level
If blinking
the panel works
properly
Panel Status
Types of activities
1=Load AUDIO 2=Save AUDIO 3=Load PROG
USB actions
4=Save PROG 5=FW Upgrade 6=Save LOG
0=Extra
Fc501 Panel lev.3 : PROGRAM
Choice of Language
1=load first lang.
2=load second lang.
ESC
1
ABC
2
DEF
o
USB File
OK
Gathering information
RUNNING
USB FC501
Go to select language
to change page
FRANCAIS
PORTUGUESE
wait please
USB FC501
FAILED
CORRUPTED FILE
USB File
TROUBLE
ESPANOL >>> [ ]ESPANOL
ESC
PAGE for
SELECT THE LANGUAGE
Figure 52 The scheme in the figure displays the LCD pages sequence required by this feature: "Language strings
download during panel run time"
Animation
_
USB FC501
Go to the native
languages
selection page
FRANCAIS
PORTUGUESE
List of languages In the USB
memory stick
>>> [ ]ESPANOL ESPANOL
ESC
USB FC501
>>> [ ESPA------- ]ESPANOL
40%
NOTE: at the end of this process the initial
configuration steps (front page) will continue.
If the language strings transfer process, from
USB to panel, fails a fault page is displayed
and the native Italian language is restored
POWER ON
ESC
_
_
_
_
_
_
_
_
_
_
_
LANGUAGE LIST WAITING PAGE
Figure 53 This figure displays the LCD page sequen
-
ce required by feature: "Language strings download via
USB key at the first panel power-up" (USB memory
stick inserted and correct language file present)