This is the map that will be shown in the condition of ab
-
sence of events.
Ø
2) Do the same for more level of maps and insert in
each node of the tree structure its plan (e.g. the pictu
-
re of the building, the floor where the system is instal
-
led and the installation plan).
Ø
3) Use the icon to delete any map/structure.
Ø
4) Insert the devices on the maps; after the map has
been selected, click on the name of the installation,
in the same window, under the tree. A list of all devi
-
ces on the loop will be shown. At this point it is suffi
-
cient to drag the selected device in the relevant
position on the map in question.
Ø
5) The final map consists of a series of separate pa
-
ges linked together and easily accessible with a few
mouse clicks, or by accessing to the tree diagram.
+
The Graphic Map, in Real time, is shown in a dedica
-
ted window. It is possible to analyze more than one
device at a time, but each new image requires additio
-
nal system resources. Consequently, to analyze
more than four devices simultaneously is inadvisable
In Real-time mode, the Graphic map is normally shown
in stand-by status (first map/Background).
Ø
6) When the fire panel detects and reports a changed
status of detector or module, the FC501 console re
-
places the icon of the detector with the icon of the
event (Fire Alarm, Fault, etc.).
Ø 7) The FC501 console activates the Graphic map
where the detector/module has changed status.
Through the connection between the activated map
and the first map/background of higher level, the
area associated will blink.
Ø
8) Use the icon to realize the drawing of possi
-
ble areas, that will blink when the contained devices
will be activated. To close the area: a double click
using the Dx button.
Ø
9) Use the icon to delete any devices or areas,
after they are selected.
For more info about the functioning and use of Graphic
maps, follow the Help, accessible both by main menu
and by the Graphic maps.
Disable The Disable page (click-on the right button on
the selected device) is available only when the FC501
Console communicates in Real Time.
The items that can be disabled/enabled are:
devices, zones.
Before sending a Disable/Enable command, the FC501
Console prompts to enter the User password.
42 Addressable Fire Panel FC501
DAY/
NIGTH
INIT.
MESSAGE
FW VERSION
DISABLE
CHANGE
USER PWD
DATE & TIME
SW ZONE
DEVICE
OUTPUTS
LOG
SYSTEM
TELECOM
INSER
PANEL NAME
VIEW
FW VER.
INSER
NEW USER
PASSWORD
CHOOSE WHAT DISABLE/ENABLE
NETWORKDEVICE OUTPUT COMMUNIC.SW ZONE
DISABLE
ZONE
CHOOSE
SW ZONE
DISABLE
COMMUNIC.
CHOOSE
OUTPUT
DISABLE
OUTPUT
CHOOSE NET
EQUIPMENT
DISABLE NET
EQUIPMENT
DISABLE
DEVICE
SHOW
DEVICE
CHOOSE
DEVICE
CHOOSE
LOOP
SHOW
OUTPUT
STATUS
SHOW
OPTIONS
VIEW
LOG
NETWORK
SHOW
NETWORK
STATUS
SHOW
SW ZONE
STATUS
CHOOSE WHAT MODIFY
LOOP
SCAN & SHOW
LOOP PARAM.
MAIN PAGE
MODIFY
PROGRAM ANALYZE VIEW LOG
LIST
VIEW LIST
INSERT
USER
PASSWORD
PASSWORD
WRONG
CHOOSE
INTERFACE
DISABLED
DEVICES
DISABLED
ZONE
DISABLED
PART S
VIEW & SCAN
DISABLED
SW ZONE
VIEW & SCAN
DISABLED
DEVICE
VIEW & SCAN
DISABLED
PART S
VIEW LISTS
ALARM
FAULT
WARNING
PREALARM
WALK TEST
CHOOSE WHAT TO ANALYZE
1 3 4
5 6 7 8 9
2
SHOW
TELECOM
STATUS
LOG
CLEARING
INSERT
DATE & TIME
1
3 42
1 32
1 3 42 5 6
Lev. 1
Lev. 2
Lev. 2
Lev. 2
4
1
2
3
4
2
3
4
2
3
4
2
3
4
2 3
CLEAR
LOG
ZONE
WALK TEST
5 6
SELECT
DAY/NIGHT
MODE
IMPOSTA
ZONE
WALK TEST
SW ZONE IN
WALK TEST
FAULT S LIS T
VIEW & SCAN
SW ZONE
IN WALK TEST
4 5 6 7
ACTIVE
WALK TEST
WARNINGS
LIST
VIEW & SCAN
ACTIVE FAULTS
VIEW & SCAN
ACTIVE
WARNINGS
VIEW & SCAN
DEVICE IN
WALK TEST
INSERT
INSTALLER
PASSWORD
SHOWS
RESULTS
PROGRAM
DEVICE
AUTO
SW ZONE SYSTEM
USB
FACT ORY
DEFAULT
PROGRAM
SW ZONE
CHOOSE
ZONE
PROGRAM
SYSTEM
USB
ACTIVITIES
DEVICE
OUTPUT
CHOOSE
DEVICE
CHOOSE
LOOP
CHOOSE
OUTPUT
PROGRAM
OUTPUT
SELECT WHAT TO PROGRAM
WRONG
PASSWORD
SHOWS
DETAILS
DIFFERENCES
FOUND
ENROLL
1
3 4 7 8 9
0
L3 PWD
2
CONFIRM
PAG E
DEFAULT
DATA
FORCE
MODIFY
INSTALLER
PWD
*
WALK TEST
FW
UPGRADE
LANGUAGE
Lev. 3
ENROLL
WAIT
PLEASE
SMOKE DELAY
30-60 min
**
SAVE
LOG
SAVE
PROGRAM
LOAD
PROGRAM
SAVE
AUDIO
LOAD
AUDIO
PAN EL
ID
*
**
See the “Loop device programming” page
See the “Output programming” page
PAGE DIRECTLY
ACTIVATED
BY EVENTS
CHOOSE
DEVICE
CHOOSE
LOOP
INSERT
USER
PASSWORD
PASSWORD
WRONG
NETWORK
CHOOSE
MFI
AC TIVAT E
MFI
5
DISABLED
DEVICES
DISABLED
ZONE
DISABLED
PART S
VIEW & SCAN
DISABLED
SW ZONE
VIEW & SCAN
DISABLED
DEVICE
VIEW & SCAN
DISABLED
PART S
1 32
PASSWORD
DISABLE
PASSWORD
CHOOSE
USER OR
INSTALLER
7
FIRE RELAY
8
DISABLE
FIRE RELAY
***
ENTRY VALID ONLY FOR INSTALLER #1 (00000= Default)
***
Lev. 1
0
VIEW
ID NUMBER
PAN EL
MAP.DEVICE
5
Figure 32 Diagram of all possible operations from the panel, L1, L2 and L3 Levels
To Next Page
Loading...
