FISCHER FT90 - Page 51

FISCHER Mess- und Regeltechnik GmbH Operation | 5
BA_EN_FT90 51/108
Menu name Description
Damping C3 This parameter can be used to set
damping for the 3rd measuring chan-
nel.
Back E This is the exit point of the 'Quick ac-
cess' menu. It takes you back to the
main menu.
Signposts [►Page]
• Language [}83]
• Designation [}83]
• Meas.range C1 unit [}57]
• Meas.range C1 start [}58]
• Meas.range C1 end [}59]
• Damping C1 [}59]
Since the configuration of all of the channels is identical, only the first channel is
described. The links for the other channels are therefore missing.