Fluke Biomedical ProSim 8

To Next Page

To Previous Page

Vital Signs Simulator

Accessories

Table 4. Optional Accessories

Item Fluke Biomedical Part Number

SpO

Finger Module with cable 3985658

SpO

Masimo RAINBOW cable 4034609

Battery pack 4021085

NIBP Test 500 mL rigid chamber 4034611

Simulation Cables:

IBP

Temperature

See your Fluke Biomedical Distributor

Cardiac Output Interface Box 2392199

Upgrade kit to ProSim™ 8 3987196

USB Wireless Dongle 3341333

Mini-DIN to DIN IBP Adapter 3408564

NIBP Mandrel Set 4308086

Main Page

Table of Contents5
Introduction13
Intended Use13
Safety Information14
Symbols15
Unpack the Product16
Accessories16
Instrument Familiarization18
Turn on the Product20
Connect a PC to the Product21
Pre-Defined Simulations22
ECG Function24
Set the ECG Parameters24
View the ECG Waveform27
Simulate an ECG Artifact27
Simulate Arrhythmias28
Supraventricular Arrhythmias30
Premature Arrhythmias30
Ventricular Arrhythmias31
Conduction Arrhythmias32
Pacemaker Waveforms32
Advance Cardiac Life Support (ACLS) Waveforms34
ECG Performance Tests34
Set a Performance Wave34
Set R Wave Detection Values36
Set QRS Detection Test Values37
Set Tall T Wave Rejection Test Values38
Fetal Simulation39
Set Fetal Heart Values39
Simulate Intrauterine Pressure (IUP)40
Set the Fetal Heart Rate Response42
Set the Intrauterine Contraction Simulation42
Invasive Blood Pressure Simulation and Tests43
Set the Invasive Blood Pressure Variables43
Simulate Invasive Blood Pressure Tests45
Simulate a Swan-Ganz Procedure46
Simulate a Cardiac Catheterization Procedure47
Simulate Temperature51
Simulate Respiration52
Simulate Cardiac Output54
Set the Cardiac Output Waveform57
Set the Baseline Temperature57
Set Injectate Temperature57
Start a Cardiac Output Simulation57
Non-Invasive Blood Pressure Simulation and Tests58
Set the Non-Invasive Blood Pressure Variables58
Adjust NIBP Pulse Envelope62
Do an NIBP Monitor Test63
Do a Pressure Leak Test64
Do a Pressure Relief Test66
Do a Pressure Source Test68
Check a Manometer69
Zero Pressure70
Oximeter Spo 2 Optical Emitter and Detector70
Set the Spo74
Test a Masimo Rainbow Spo76
Perform an Oximeter Limits Test77
Oxygen Limits Test77
Pulse Rate Test77
Pulse Amplitude Test77
Autosequences77
View the Steps of an Autosequence80
Do an Autosequence81
Save and View Test Results82
Make an Operator ID83
Make a Test ID84
Save Test Results84
View Test Results86
Print Test Results87
Delete Saved Data88
Setup Features88
Set the Time and Date89
Set the Backlight Intensity89
Set the Beeper90
Set the Pressure Units and IBP Sensitivity90
Set Battery Settings91
Set the Display Language91
Control the Product Remotely92
Maintenance92
Clean the Product93
Battery Maintenance93
Charge the Battery94
Battery Removal95
General Specifications96
Detailed Specifications97
Normal-Sinus-Rhythm Waveform97
Pacemaker Waveform97
Arrhythmia98
ECG-Performance-Testing98
ECG Artifact99
Fetal / Maternal-ECG99
Invasive Blood Pressure99
Respiration100
Temperature100
Cardiac Output100
Non-Invasive Blood Pressure101
Oximeter Spo2 Optical Emitter and Detector (Optional)101
Pre-Defined Simulations102
Autosequences (Default)102
Glossary103
Introduction103

Fluke Biomedical ProSim 8 - Page 17

Table of Contents

Related product manuals