Fluke Biomedical ProSim 8 - View the Steps of an Autosequence

ProSim 8
Users Manual
68
Table 14. Autosequences (cont.)
Autosequence Sequence Steps Run Time
NIBP Sequence
Waveform: Square; Rate: 2.0 Hz; Amplitude: 1.0 mV 00:05
Waveform: Sine; Rate: 0.05 Hz; Amplitude: 1.0 mV 00:05
Waveform: Sine; Rate: 0.5 Hz; Amplitude: 1.0 mV 00:05
Waveform: Sine; Rate: 1 Hz; Amplitude: 1.0 mV 00:05
Waveform; Sine; Rate: 10 Hz; Amplitude: 1.0 mV 00:05
Waveform: Sine; Rate: 50 Hz; Amplitude: 1.0 mV 00:05
Waveform: Sine; Rate: 60 Hz; Amplitude: 1.0 mV 00:05
Waveform: Sine; Rate: 100 Hz; Amplitude: 1.0 mV 00:05
Waveform: Sine; Rate: 150 Hz; Amplitude: 1.0 mV 00:05
Waveform: Triangle; Rate: 0.125 Hz; Amplitude: 1.0 mV 00:05
Waveform: Triangle; Rate: 2.0 Hz; Amplitude: 1.0 mV 00:05
Waveform: Pulse; Rate: 60 BPM; Amplitude: 1.0 mV 00:05
REPEAT Total time 01:10
IBP Sequence
IBP 1: 120/80 mmHg (Art), 2: 120/0 mmHg (LV) 01:00
IBP 1: 25/0 mmHg (RV), 2: 120/80 mmHg (Art) 01:00
IBP 1: 25/10 mmHg (PA), 2: 10/2 mmHg (PAW) 01:00
REPEAT Total Time 03:00
Temperature Sequence
Temperature 30.0 °C 00:20
Temperature 34.0 °C 00:20
Temperature 37.0 °C 00:20
Temperature 42.0 °C 00:20
STOP Total Time 01:20
View the Steps of an Autosequence
To view an autosequence:
1. Push .
2. Push , , , or  to highlight Autosquences.
3. Push .
4. Push  or  to highlight an autosequence in the list. See Table 14.
5. Push .