Fluke Biomedical ProSim 8 - Set the Time and Date; Set the Backlight Intensity

Vital Signs Simulator
Setup Features
77
Set the Time and Date
You can set the date, time, and the format in which they show on the display.
From the Setup screen, push  or  to highlight Date/Time Settings and then
push . To go back to the Setup screen, push the Back softkey.
To set the date:
1. Push  or  to highlight the Date value.
2. Push .
3. Push  or  to move to the Month, Day, or Year.
4. Push  or  to increase or decrease the value.
5. Push  to set the date and go back to the Date/Time Settings screen.
To set the time:
1. Push  or  to highlight the Time value.
2. Push .
3. Push  or  to move to the Hour, Minute, or Second value.
4. Push  or  to increase or decrease the value.
5. Push  to set the time and go back to the Date/Time Settings screen.
To set the date format:
1. Push  or  to highlight the Date Format value.
2. Push .
3. Push  or  to highlight the Date Format value.
4. Push  to set the date and go back to the Date/Time Settings screen.
To set the time format:
1. Push  or  to highlight the Time Format value.
2. Push 
.
3. Push  or  to highlight the Time Format value.
4. Push  to set the format and go back to the Date/Time Settings screen.
Set the Backlight Intensity
The backlight on the Product has two intensity levels: Low and High. You can set
each intensity separately. From the Setup screen, push  or  to highlight
Display Settings and push . To go back to the Setup screen, push the
Back softkey.
To set the backlight intensity:
1. Push .
2. Push  or  to highlight a Backlight value.
3. Push  or  to increase or decrease the backlight intensity.
4. Push  to set the backlight intensity and go back to the Display Settings
screen.