ProSim 8
Users Manual
80
Control the Product Remotely
Ansur test automation systems uses a solutions-based procedure for medical
device tests. Ansur helps you make standard work through test templates and/or
sequences that use your written test procedure. All test results are then
integrated into one test report that you can print or archive. Ansur manages your
test procedures through manual and visual automated test sequences.
The software works hand-in-hand with Fluke Biomedical analyzers and
simulators, that integrates:
• Visual inspections
• Preventive maintenance
• Work procedures
• Performance tests
• Safety tests
Ansur software uses plug-in modules to interface with a wide array of Fluke
Biomedical instruments. The plug-in module is a software interface to the Ansur
test program. Plug-ins supply test elements used by Ansur Executive that use the
same user interface for all analyzers and simulators supported by an Ansur
plug-in.
When you purchase a new Fluke Biomedical analyzer or simulator, you can
update your existing Ansur software by installing a new plug-in. Each plug-in
module allows you to work only with the options and capabilities you need for the
instrument you are testing.
Maintenance
The Product is a calibrated measurement instrument. Try to prevent mechanical
abuse that could change the calibrated values. The Product has no internal user-
serviceable parts.
WX Warnings
For safe operation and maintenance of the Product:
• Repair the Product before use if the battery leaks.
• Use only Fluke Biomedical approved power adapters to
charge the battery.
To prevent possible electrical shock, fire, or personal injury:
• Batteries contain hazardous chemicals that can cause burns
or explode. If exposure to chemicals occurs, clean with
water and get medical aid.
• Do not disassemble the battery.
To Next Page
Loading...
