ProSim 8
Users Manual
16
To change the size of the artifact:
1. From the ECG screen, push or to highlight the Artifact Size value.
2. Push or to highlight 100%, 50%, or 25%.
3. Push to set the artifact size and go back to the ECG screen.
You can add the artifact signal to one ECG lead or all leads. To change which
lead the artifact is on:
1. From the ECG screen, push or to highlight the Artifact Lead value.
2. Push or to highlight RA, LL, LA, V1 – V6, or All Leads in the lead list.
3. Push to set the artifact lead and go back to the ECG screen.
Simulate Arrhythmias
All arrhythmia simulations are grouped into related wave groups. These
arrhythmia wave groups are Supraventricular, Premature, Ventricular,
Conduction, TV Paced, and ACLS. Table 10 shows all the arrhythmias the
Product can simulate and identifies in which wave group they can be found. The
table also identifies which model can simulate the arrhythmia.
Table 10. Arrhythmias by Wave Group
Arrhythmia Wave Group
Asynchronous 75 BPM TV Paced
Asystole ACLS, Ventricular
Atr-Vent Sequential TV Paced
Atrial Fibrillation Supraventricular
Atrial Flutter Supraventricular
Atrial PAC Premature
Atrial Tach Supraventricular
Atrial 80 BPM TV Paced
Bigeminy Ventricular
Bradycardia ACLS
Demand Freq Sinus TV Paced
Demand Occ Sinus TV Paced
Freq Multi-focal PVCs Ventricular
Ischemic Chest Pain ACLS
Lt Bndl Branch Block Conduction
MIs with LBBB ACLS
MIs with RBBB ACLS
Missed Beat at 80 BPM Supraventricular
Missed Beat at 120 BPM Supraventricular
Mono V Tach Ventricular
To Next Page
Loading...
