Fluke Biomedical ProSim 8 - Set Battery Settings; Set the Display Language

Vital Signs Simulator
Setup Features
79
Set Battery Settings
To help save battery life, you can set the Product to power down (Auto power off)
when no buttons are sensed as pushed for a set period of time. You can also set
whether or not the battery charges in the Product. From the Setup screen, push
 or  to highlight Battery Settings and push . To go back to the Setup
screen, push the Back softkey.
To set auto power off:
1. Push  or  to highlight the Auto Power Off value.
2. Push .
3. Push  or  to highlight an Auto Power Off value: 10, 30, or 60 minutes.
4. Push  to set auto power and go back to the Battery Settings screen.
To set the battery charger:
1. Push  or  to highlight the Charge Battery value.
2. Push .
3. Push  or  to highlight Yes or No.
4. Push  to set the charger value and go back to the Battery Settings
screen.
Note
A 1-minute warning message shows on the display before the
Product turns off.
Set the Display Language
You can setup the Product to show text and messages on the display in different
languages. To set the language, push  or  to highlight Instrument
Information in the Setup screen and push . To go back to the Setup
screen, push the Back softkey.
The language already set in the Product, shows on the display. To change the
language:
1. Push .
2. Push  or  to highlight a language in the list. Below is a list of the display
languages.
English Spanish
French Japanese
Italian Chinese
German
3. Push .