Flytec 6030 - Page 68

© Flytec USA, 2007 – 2014 Printed on 100% post-consumer recycled paper
68
Pilots 1 & 2 are outside the
start cylinder waiting for
the 14:00 start. The
countdown timer/Start
Race is counting down, at
14:00 the tripple beep is
given. Pilot 1 & 2 enter the
cylinder, the TP reached
sound is given and the
6030 will switch to WP1.
6030
Pilot 2 decides to
take a later start
and leaves the
cylinder. A press of
the
" key (with
next ! pr " wp
showing in the
Information Field)
indexes to the 14:20
start, the
Countdown
timer/Start Race will
start counting down
again.
At 14:20 (Countdown
timer/Start Race=0)
pilot 2 will again hear
the tripple beep. When
the pilot enters the
cylinder the TP
reached sound will be
given and the 6030 will
advance to WP1.
Pilot 3 is waiting for the
14:00 start inside the
cylinder. Just after 14:00,
the Countdown timer/Start
Race becomes possitive
and the tripple beep is
given. Since the pilot is
inside the start cylinder the
pilot now leaves the start
cylinder. Upon reentry, the
TP reached sound is given
and the 6030 will switch to
WP1.