9 Main Setup Menu
To access the 6030’s Main Setup Menu, long press the Menu key. To select one of the sub-menus, highlight the
desired item with the !" keys and press the OK key. If the sub-menu has more than one page you can scroll
through them with the #$keys. If a menu item has further sub-menus its name is preceded with a > character.
Main Setup Menu
Flight Memory and Tracks $ Stored flights
Waypoints $ Waypoint list
Routes $ Route list
Airspaces $ CTR list
>Settings
>Vario
Vario response delay
Digital vario mode
Last thermal threshold
Thermal averager
>Acoustic vario
Customize sound
Lift audio threshold
Near thermal tone
Sink tone threshold
>Speed
Speed mode
Pitot correction
Vane wheel correction
Stall speed
TEC Total energy comp.
>Recording
Recording mode
Recording interval
McCready
CTR Alarm
Polar Data
Map orientation
Auto Zoom C-Route
Pilot Name
Glider type
Glider Id
>Clear/Initialize memory
Delete all flights
Delete all WP & routes
Initialize EEPROM
Init CTRs
Simulation mode
>Device settings
Display contrast
Language $ Set language for display text
Battery type $ Choose NiMH or Alkaline
UTC offset $ Set time offset
Units $ Select units
Coordinate format $ Choose coordinate format
Userfields $ Choose 5 or seven user-fields for 3 user pages
Press. Sensor offset $ Enter pressure sensor correction for QNH
Bluetooth $ Bluetooth pairing – requires optional BT module and unlock code.
SMS $ Setup for sending GPS position via SMS. Requires installation of opt. BT module & unlock code.
FlyLink $ Set parameters for wireless communication to peripheral devices
Flarm $ Requires installation of FLARM module – contact Flytec
>Optional SW-Packages$ Enter release codes for packages 01-15
>Factory Settings$ Enter security code (for technician use only)
>SD-Card
Generate IGC File $ Use Flight Memory menu to save tracks to SD card
Export WP & routes $ Save WPs and routes from 6030 to SD card
Import WP & routes $ Load WPs and routes from SD card to 6030 card
Activate CTR file on SD card. Name of active CTR file is shown
Save Settings
Restore settings
To Next Page
Loading...
