What to do if I cannot display the MFR-TALM page on FOR-A Switch?
If you're unable to display the MFR-TALM page on your FOR-A Switch, verify that your browser is accessing the correct IP address. The MFR Main Unit and MFR-TALM unit have different IP addresses. To connect to the MFR-TALM, enter "http://192.168.1.62" (default) in the address box in the browser.
What to do if I cannot control FOR-A MFR Switch using the remote control panel?
If you are unable to control your FOR-A Switch using the remote control panel, ensure that the LAN cable is properly connected. Additionally, check the RU Info page in the Web-based Control to see if it indicates 'NG' for any items. If 'Voltage' is indicated as 'NG', contact your FOR-A agent.
Why is the secondary CPU active on my FOR-A Switch?
If the secondary CPU is active on your FOR-A Switch, ensure that both MFR-LAN (CPU1) and MFR-LAN (CPU2) are properly connected to the network by checking the cable and Ethernet hub connections. If the secondary CPU is still active after restarting, consult your FOR-A reseller.
To Next Page
General
