3
1 INTRODUCTION
THE SETUP MENU
Throughout this manual, you will be directed to use the SETUP menu of the FM9 to make changes to I/O
(Input/Output), MIDI, global settings, and more. To open the setup menu, push HOME and then press knob E.
The SETUP menu includes the following areas:
FC Controllers/Onboard Switches - includes all settings for the onboard footswitches or a connected
FC controller.
Global Settings - includes options which govern the global behavior of the FM9.
I/O - contains settings for all inputs and outputs, including levels, audio options, and switches or
expression pedals connected directly to the FM9.
MIDI/Remote - contains MIDI settings, plus several pages of remote controller assignments for the
many remote-controlled functions of the FM9.
Utilities - contains readouts, utilities, and a control to adjust screen brightness.
Paths within the setup menu are designated using colons as separators, so for example, the Reset page of
the Utilities menu under SETUP will be notated as SETUP : Utilities : Reset
To access the SETUP menu:
Press HOME.
Push the “E” soft knob to open the SETUP main menu.
Use the NAV buttons to select a submenu and press ENTER to make a selection.
Use PAGE and NAV buttons to navigate. Use VALUE and knobs A–E to make changes.
Changes in the SETUP menu take effect immediately and do not need to be stored or saved.
Press HOME at any time to return home.
Use these hyperlinks to access to the SETUP menu topics in this manual:
SETUP
FC Controllers/Onboard Switches p. 87
Global Settings p. 89
I/O p. 92
MIDI/Remote p. 95
Utilities p. 99
To Next Page
Loading...
