EasyManua.ls Logo

Fractal FM9 - 12 Tuner; ADVANCED TUNER FUNCTIONS

Fractal FM9
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
85
12 TUNER
The FM9 has a built-in Tuner—an essential tool for the performing or recording musician. The tuner is easy to use
and has high-resolution automatic pitch detection, a calibration control, offsets for modied tuning schemes, and
the option to mute audio while tuning. Find the Tuner on the Home page by pressing TUNER (Push-knob A) or on
various foot switches in the footswitch layouts.
The tuner features a note name display, a “zero-center” meter, a spinning “strobe” type display and triangular
indicators for sharp and flat.
ADVANCED TUNER FUNCTIONS
The actual tuner is on the Tune page of the Tuner menu.
The Cong and Offsets pages provide options for advanced tuner functions.
Conguration Parameters
PARAMETER Description.
Source Selects which physical input the tuner should listen at.
Mute
OFF/INPUT/OUTPUT
Determines how the tuner mute function works.
OFF: No mute. All signal is passed as usual when the tuner is engaged.
OUTPUT: The signal is muted at the output. Tails are silenced.
INPUT: The signal is muted at the noise gate. Tails ring out.
Display Mode
MIXED/ALL FLATS/
ALL SHARPS
Determines whether the tuner shows note names for accidentals as Sharps, Flats, or a
mix of both.
Calibration
430.0 – 450.0 Hz
Calibrates the tuner by setting the frequency of A4 (in the octave above middle C).
The tuner defaults to A440.
Downtune
0 – 4 Semitones
The Downtune control allows for simplied tuning when tuning down one to four
semitones. The Tuner display will read the non-downtuned equivalent note, i.e. if tuning
down two semitones, the D will still show E. While Downtune is set to any value other
than None, any blocks that utilize pitch information will also be transposed accordingly.
Use Offsets
OFF/ON
Determines whether the Offset settings (see below) are applied or ignored.
OFFSET PARAMETERS
PARAMETER Description
E1, B2, G3, D4, A5, E6
+/- 25.00 Cts
Offsets allow the tuner to be calibrated so individual notes diverge from standard
concert tuning by a dened amount. Use this for example for Buzz Feiten tuning.
12 TUNER

Table of Contents

Related product manuals