Fractal FM9 - THE UTILITIES MENU

99
13 SETUP MENU
THE UTILITIES MENU
UTILITIES: DISPLAY PAGE
Provides a slider to adjust contrast/viewing angle for the built-in LCD display.
UTILITIES: ADC LEVELS PAGE
Shows Analog-to-Digital Converter levels for the front panel Level knobs and rear panel Expression jacks for
troubleshooting. You can set the output level here at an exact percentage. The internal temperatures are also
displayed.
UTILITIES: RESET PAGE
This page provides a tool to set parameters in the SETUP menu back to factory default values.
Reset system parameters is one of the rst steps of troubleshooting. It never deletes or modies your presets but
it DOES clear all footswitch layouts. You will be prompted to press ENTER to conrm.
Be very careful with this option. Resetting system parameters is irreversible!
A utility provides the ability to Clear all Presets. You will be prompted to press ENTER to conrm.
Be very careful with this option. Erasing presets is irreversible!
A utility provides the ability to Clear all User Cabs. You will be prompted to press ENTER to conrm.
Be very careful with this option. Erasing cabs is irreversible!
UTILITIES: USB
Two meters show USB buffer levels, used for troubleshooting.
UTILITIES: FIRMWARE PAGE
This page indicates which rmware version the FM9 is running.
USB rmware version is also shown.