147
EN
Defaults - Documentation
Setting the sam-
pling rate
* Only in conjunction with the OPT/i limit monitoring option
Select "Defaults"
Select "Documentation"
Select "Basic settings"
The basic settings documentation is displayed.
Press the adjusting dial
Turn the adjusting dial and change the sampling rate value:
off
Sampling rate is deactivated; only average values are stored.
0.1–100.0 s
Documentation is stored with the set sampling rate.
Select "OK" to confirm the sampling rate
The documentation overview is displayed.
2
1
3
2
1
3
*
1
2
3
4
5
6
To Next Page
Loading...
