Fronius TPS 320i - Deactivating User Management

167
EN
Confirm when prompted
The user is deleted.
Deactivating user
management
Select the pre-defined "admin" user under Defaults / Administration / User manage-
ment
Turn the adjusting dial and select "NFC card"
Press the adjusting dial
A confirmation prompt asking whether you want to delete or replace the NFC card is dis-
played.
Select "delete"
User management is deactivated, the power source is locked.
The power source can be locked and unlocked again with any NFC key (see page 64).
8
1
2
NOTE! If the NFC card is deleted by the predefined "admin" user, user manage-
ment is deactivated.
1234567890abcd
3
3
4