25
EN
General
Device concept
The MIG/MAG power sources TPS 320i,
TPS 400i, TPS 500i and TPS 600i are com-
pletely digitised, microprocessor-controlled
inverter power sources.
The modular design and potential for sys-
tem add-ons ensure a high degree of flexi-
bility. The devices can be adapted to any
specific situation.
Functional princi-
ple
The central control and regulation unit of the power sources is coupled with a digital signal
processor. The central control and regulation unit and the signal processor control the en-
tire welding process.
During the welding process, the actual data is measured continuously and the device re-
sponds immediately to any changes. Control algorithms ensure that the desired target
state is maintained.
This results in:
- a precise welding process
- exact reproducibility of all results
- excellent weld properties.
Application areas The devices are used in workshops and industry for manual and automated applications
with classical steel, galvanised sheets, chrome/nickel and aluminium.
The power sources are designed for:
- Automobile and component supply industry
- Machine manufacturing and rail vehicle construction
- Chemical plant construction
- Equipment construction
- Shipyards, etc.
To Next Page
Loading...
