Fronius TPS 320i - Connecting the Mains Cable

To Next Page

To Previous Page

Connecting the

mains cable -

general

IMPORTANT! The ground conductor should be approx. 30 mm (1.18 in.) longer than the

phase conductors.

1 2

3 4

CAUTION! Risk of injury and material damage due to short circuits.

Short circuits can occur between the phase conductors or between the phase

conductors and the ground conductor unless ferrules are used.

Fit ferrules to all phase conductors in an exposed mains cable as well as the

ground conductor.

NOTE! Mains cables must be connected to devices in compliance with national

standards and guidelines and the work must be carried out by a qualified person.

3 4

Fronius TPS 320i - Connecting the Mains Cable - General