177
EN
Job-Data
Job data If the OPT/i Jobs option is available on the power source, the following is possible in the
Job data entry:
- Existing welding system jobs can be viewed *
- Existing welding system jobs can be optimised
- Jobs stored externally can be transferred to the welding system
- Existing jobs in the welding system can be exported as a PDF * or CSV file
* Viewing and exporting as PDF also works when the OPT/i limit monitoring option
is not available on the power source.
Job overview The job overview lists all jobs stored in the welding system.
Clicking on a job displays the data and parameters stored for this job.
Job data and parameters can only be viewed in the job overview. The column width for pa-
rameters and values can be easily dragged and adjusted with the mouse pointer.
Other jobs can easily be added to the list with the data listed by clicking on the “Add job”
button.
All added jobs are compared to the job that is currently selected.
Editing a job Existing welding system jobs can be optimised, provided the OPT/i Jobs option is present
on the power source.
Click on "Edit job"
Click on the job to be amended in the list of available jobs
The selected job is opened and the following job data is shown:
- Parameter
The parameter currently stored in the job
- Value
The values of the parameter currently stored in the job
- Change value to
For entering the new parameter value
- Setting range
Possible setting range for the new parameter values
Amend the values accordingly
Save / Delete adjustments, Save as / Delete job
As an aid when editing a job, other jobs can be added with ease to the list with the data
displayed by clicking on "Add job".
1
2
3
4
To Next Page
Loading...
