Fronius TPS 320i - Smartmanager - the Power Source Website; General Remarks; Calling up the Power Source Smartmanager

171
EN
SmartManager - The power source website
General remarks The power source has its own website: SmartManager.
As soon as the power source is connected to a computer with the help of a network cable,
or is integrated into a network, the power source's SmartManager can be retrieved using
the power source's IP address.
At least IE 10 or a similar modern browser is required to access SmartManager.
The entries displayed on SmartManager may vary depending on system configuration,
software upgrades and available options.
Examples of entries displayed:
* Depending on the available robot interface, the name of the interface will be dis-
played as an entry on the website.
Calling up the
power source
SmartManager
Settings / System / Information ==> Note down the IP address for the power source
Enter the IP address in the browser search field
Enter user name and password
Factory setting:
User name = admin
Password = admin
Confirm the displayed message
The power source SmartManager is displayed.
- Actual system data
- Documentation
- Job data
- Power source configuration
- Backup & Restore
- User management
- Signal visualisation
- Overview
- Update
- Function packages
- Characteristics overview
- Screenshot
- Robot interface *
3
2
1
4
xx.x.xxx.x
universal
1
2
3
4