100
Calibrating cam-
era settings
Camera settings must be entered for the VR glasses or the welding helmet.
The camera settings allow you to adjust the welding helmet sensor. This makes it possible
to adapt the Virtual Welding system to the individual body size and the resulting perspec-
tive.
Touch the "Start" button next to "Camera Settings"
A dialogue window where you can enter settings for
- the VR glasses ("Glasses"), by adjusting the zoom level ("Zoom")
- the welding helmet ("Helmet"), by adjusting the zoom level ("Zoom") and height of the
viewing angle ("Height")
Touch the "Glasses" or "Helmet" button.
A dialogue window, e.g. for the welding helmet, appears with a slider to adjust the height
of the viewing angle. The zoom level is adjusted in the same way.
1
2
To Next Page
Loading...
