Fronius Virtual Welding - Control Elements and Connections; Standup Terminal Controls and Connection Sockets

30
Control elements and connections
StandUp terminal
controls and con-
nection sockets
In the following illustrations, the controls and connection sockets (1) to (4) are located in
the intermediate area between the upper and lower parts of the StandUp terminal. Con-
nection sockets (5) to (8) are located on the back of the StandUp terminal.
No. Function
(1) Connection socket for the workpiece sensor
for connecting the sensor cable of the workpiece holder
(2) Connection socket for the helmet sensor or filler material sensor
for connecting the sensor cable of the welding helmet
for connecting the sensor cable of the filler material (TIG)
(3) Connection socket for the welding torch sensor
for connecting the sensor cable of the welding torch
for connecting the sensor cable of the electrode holder
(4) Connection socket for the welding torch control cable
for connecting the control cable of the welding torch
for connecting the control cable of the electrode holder
(5) USB port
for connecting the supply cable of the VR glasses (optional)
(6) LAN connection socket
for connecting a LAN network cable
(7) External VGA connection socket
for connecting an external monitor or projector, in conjunction with a DVI/VGA dis-
tributor (43,0004,4492)
(8) VR glasses connection socket
for connecting the data cable of the VR glasses
(4)(3)(2)(1)
(7)(6) (8)(5)