Fronius Virtual Welding - Technical Data; Special Voltages; Virtual Welding Terminal and Mobilecase; Standards

153
EN
Technical data
Special voltages For devices designed for special voltages, the technical data on the rating plate applies.
Virtual Welding
terminal and Mo-
bileCase
Standards The device has been tested and found to be compliant pursuant to the following standards
in accordance with the relevant guidelines.
Mains voltage +/- 10 % 110 V - 230 V
Grid frequency 50/60 Hz
Mains fuse 3.15 A
Current input max. 1.2 A
EMC emission class A
Mark of conformity CE
EN 55032:2015
In accordance with 2014/30/EU and
2014/35/EU.
EN 55024:2010 + A1:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 62368-1:2014 + A11:2017 /
IEC62368-1:2018
EN 62311:2008