Fronius Virtual Welding - The Setup Menu; Overview; Overview of Buttons; Accessing the Setup Menu

113
EN
The Setup menu
Overview The setup menu allows the following settings:
- Cluster network
- Other settings
Language settings, country profiles, data export, etc.
- Technical settings
Date, time, calibration, hardware test, etc.
Overview of but-
tons
Below is an overview of the buttons frequently used in the setup menu
Accessing the
Setup menu
To access the setup menu:
Hold a valid authorisation card close to the sensor (1)
- The first scan provides access to Terminal Management
- The second scan provides access to the Setup menu
Edit Remove
Confirm OK
Save Cancel
Add Up and down
Back
1
(1)
(1)