124
Enter a new 4-digit code in the upper input field and then repeat it in the lower input
field
Touch the Enter key on the virtual keypad to save the new management code
Save the management code by touching the floppy disk symbol
Importing Risk of data loss: When you import data, the settings saved on the terminal are overwritten.
Selected settings for the Virtual Welding system can be imported from a USB stick.
Plug a normal USB stick into the USB connection socket (1) of the Virtual Welding sys-
tem
Touch the "Import" button
Touch:
- "All data" - the following settings and data are imported:
- Courses
- Curriculum
- Profiles
- Ranking lists (without playback function)
- Settings for the Variable Ghost
3
4
5
1
2
3
To Next Page
Loading...
