Fronius Virtual Welding - Settings; Settings - Activating Modes; Settings - Activating VR Glasses

81
EN
Settings
Settings - activat-
ing modes
In the settings the following modes can be activated or deactivated:
- "Coursemode"
- "Showroom mode"
- "Open mode"
Select the desired mode
Touch the button next to the mode, changing it to "Active"
Press the "apply" button
The system leaves terminal management, the selected mode is activated.
Settings - activat-
ing VR glasses
If the VR glasses are connected to the Virtual Welding system, they can be activated or
deactivated using the "VR - glasses" function.
Detailed information on how to connect the VR glasses can be found in the "Installation
and commissioning" section on page 41.
Select "VR glasses"
Press the button next to it, changing it to "activate"
Press the "apply" button
1
2
3
1
2
3