EasyManua.ls Logo

Fronius Virtual Welding - Mobilecase: Setting up

Fronius Virtual Welding
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
EN
No. Function
(4) LAN network cable
if necessary
MobileCase: Set-
ting up
WARNING!
A device toppling over could easily kill someone.
Set up the device in a dry and enclosed environment on a stable and horizontal surface.
NOTE!
There is a danger of incorrect operation if any metallic objects are in the vicinity.
There must be no metallic objects in the immediate vicinity of the device.
To allow the device to acclimatise, do not plug in the mains cable until the device has been
assembled and do not switch on the device for 4 hours after setting up.
The MobileCase consists of an aluminium
carrying case containing all the compo-
nents.
Remove the carrying case from the
transport packaging
Take the MobileCase and the work ta-
ble out of the carrying case
(4)
1
2

Table of Contents

Related product manuals