Fronius Virtual Welding - Ghost: Preview; Ghost: Setting the Stick-Out and Tilt Angle

71
EN
Ghost: Preview Select "Preview" to see what the welding process will provisionally look like.
For example, after setting the number of steps per workpiece, select the "Preview" but-
ton
Use the slider or arrow key to move to the point from which you want to start the weld-
ing process
Touch the cross symbol to go back to the setting last selected
Ghost: Setting
the stick-out and
tilt angle
Use the arrow keys to adjust the stick-out of the wire electrode on the welding torch
The adjustment range for the stick-out is from 10 to 25 mm.
1
2
3
1