99
EN
Calibrating the
MIG/MAG welding
torch
Bring the welding torch to the workpiece single-V butt weld layer 1 position, as illus-
trated
Press the torch trigger or touch "Next" - the coordinates of the position are saved
Position the welding torch according to the images on the touchscreen, if necessary
correct the position using the arrow keys.
Select "Save" to end system calibration and exit terminal management.
Note on calibrat-
ing a TIG welding
torch
NOTE!
When using a filler metal for TIG as illustrated, pay attention to the notch!
1
2
3
4
To Next Page
Loading...
