64
Ghost
Ghost The "Ghost" button allows you to create "Variable Ghosts". The Variable Ghost is an aid
which helps the trainee to guide the welding torch or electrode holder correctly by means
of colours and direction arrows. The Variable Ghost allows the trainee to enter optimum
settings based on his own judgement.
A reference weld is used as the template for creating the Variable Ghost. This can then be
optimised in numerous ways. A Variable Ghost can be created for all welding processes.
The Ghost can be classified by welding process, for example:
- "All"
- "Metal active gas welding"
("Metal active gas welding")
- "Manual metal arc welding"
("Manual metal arc welding")
- etc.
Creating a Ghost Touch "Ghost"
If no Variable Ghost has been created yet, the following message appears: "No Ghost
available. Please create a new one."
Touch "New Ghost"
1
An overview of conditions for the reference welding operation appears, in the form of the
welding parameters listed below:
Welding process
e.g.: MAG welding
Weld shape / Weld volume
e.g.: Single-V butt weld
2
To Next Page
Loading...
