Fronius Virtual Welding - Page 45

45
EN
Disconnect the VGA cable from the monitor to the computer box (graphics card) at po-
sition (1)
Connect the optional DVI/VGA distributor (43,0004,4492) (2) to the now vacant VGA
connection socket on the computer box (graphics card) at position (1)
Connect the VGA cable from the monitor (3) to the free VGA connection socket on the
optional DVI/VGA distributor (2)
Route the VGA/DVI adapter cable (4) into the cable channels as shown in the "Display
types: connection diagram" section
Connect the VGA/DVI adapter cable (4) to the free DVI connection socket on the op-
tional DVI/VGA distributor (2)
Connect the VGA/DVI adapter cable (4) to the other end of the "external connection
socket" ("Controls and connection sockets" section)
(1)
(2)
(3)
(4)
1
2
3
4
5
6