16 Appendix
596
Appendix
16
Paper Size Output tray Maximum: 13 × 19" (330 × 483 mm),
12.6 × 19.2" (320 × 488 mm)
Minimum: Postcards (100 × 148 mm), 8.5 x 5.5" (215.9
× 139.7 mm)
Finisher tray Maximum: 13 × 19" (330 × 483 mm),
12.6 × 19.2" (320 × 488 mm)
Minimum: B5 , 8 × 10", (203 × 254 mm)
Paper Weight 64 - 300 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (not stapled)
A4 : 3,000 sheets
B4 or larger : 1,500 sheets
Mixed stack
*
: 300 sheets
Finisher tray (stapled)
A4 : 200 sets or 3,000 sheets
B4 or larger : 100 sets or 1,500 sheets
Mixed stack
*
: 70 sets or 200 sheets
* : Larger size paper is stacked on top of smaller size paper.
Important • When using 80 gsm paper.
Staple Capability : 50 sheets (90 gsm or less)
Paper Size : Maximum: A3, 11 x 17",
Minimum: B5 , 8 x 10"
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 gsm paper.
Punch Number of Holes : 2/3/4 holes
Paper Size : A3, 11 x 17", B4, A4
*
, A4 , 8.5 x 11", 8.5 x 11" ,
B5 , 7.25 x 10.5" , 8 x 10"
*
, 8 x 10" , 16K ,
Cover A4 , 9 x 11" , 215 x 315 mm, 8.5 x 13"
*
,
8.5 x 14"
*
, 11 x 15", 8K
* : The 3 holes (optional) are not available.
Note • The Punch Unit 2/4H CD1 (optional) or the Punch Unit US 2/3H CD1
(optional) is required.
• 2 or 4 holes are available when the Punch Unit 2/4H CD1 is installed. 2
or 3 holes are available when the Punch Unit US 2/3H CD1 is installed.
Paper Weight : 64 - 200 gsm
Important • When using 80 gsm paper.
Folding
Z fold
Paper size : A3, B4, 11 x 17"
Paper type : 90 gsm or less
C fold
Paper size : A4, Letter
Paper weight : 90 gsm or less
Important • The Folder Unit CD1 (optional) is required to use the folding feature.
Power Supply/Maximum
Power Consumption*
220 - 240 V AC ±10%, 0.5 A for both 50/60 HZ ± 3%
100 W or less
* : This is for the Folder Unit CD1. The another power source is required when the Folder Unit
CD1 is installed.
Dimensions Width 840 x Depth 589 x Height 1,056 mm
Width 1,075 x Depth 726 x Height 1,056 mm (when the Folder Unit CD1
and the punch unit is installed)
Note • When the Transport Unit V1 is installed and the extended tray is fully
extended.