Specifications
597
Appendix
16
C3 Finisher with Booklet Maker (optional)
Weight 44.5 kg
100.5 kg (when the Folder Unit CD1 and the punch unit is installed)
Note •Includes the weight of the Transport Unit V1.
Space Requirement Width 2,010 x Depth 804 mm (main unit + C3 Finisher)
Width 2,245 x Depth 804 mm (main unit + C3 Finisher + Folder Unit CD1 +
punch unit)
Note •When the Transport Unit V1 is installed, and the extension tray is
extended completely.
Type Output tray x 1 : Collate
Stack
Finisher tray x 1 : Collate (offset stacking available)/
Stack (offset stacking available)
Booklet tray x 1 : Collate
Stack
Paper Size Output tray Maximum: 13 × 19" (330 × 483 mm),
12.6 × 19.2" (320 × 488 mm)
Minimum: Postcards (100 x 148 mm), 8.5 x 5.5" (215.9 x
139.7 mm)
Finisher tray Maximum: 13 × 19" (330 × 483 mm),
12.6 × 19.2" (320 × 488 mm)
Minimum: B5 , 8 × 10" (203 × 254 mm)
Booklet tray Maximum: 13 × 18" (330 × 457.2 mm)
Minimum: B5
Paper Weight 64 - 300 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (not stapled)
A4: 1,500 sheets
B4 or larger: 1,500 sheets
Mixed stack
*1
:300 sheets
Finisher tray (stapled)
A4: 200 sets or 1,500 sheets
B4 or larger:100 sets or 1,500 sheets
Mixed stack
*1
:70 sets or 200 sheets
Booklet tray 20 sets
*2
*1 : Larger size paper is stacked on top of smaller size paper.
*2 : Some papers may not be placed into tray depending on the paper type.
Important • When using 80 gsm paper.
Staple Capability : 50 sheets (90 gsm or less)
Paper Size : Maximum: A3, 11 x 17",
Minimum: B5 , 8 × 10"
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 gsm paper
To Next Page
Loading...
