xxii
For Finisher
When removing jammed staples, take care not to injure your fingers.
Never touch the moving parts of the finisher during it is operated. It will cause you
to get an injury.
Never touch the safety switch. The safety switch activates to stop the machine
operation when the front doors are opened or the finisher is disconnected from the
main body by being moved to the right direction. If you puch the safety switch with
a coin or a screw driver, the machine starts operation and it may cause you to get
an injury.
Do not staple document with punched holes (e.g. perforated paper available in the
market) as the resultant detached staples can injure your fingers.
Switching Off
Others
● When the power is switched off, print data remaining in the printer and information
spooled in the memory will be erased.
Before switching off the power during normal operation, ensure that [Ready to print]
is displayed on the LCD of the control panel.
To Next Page
Loading...
Need help?
General
