Printing
46
4
4.1
Flow of Printing (Win-
dows)
This section describes the basic flow of printing in a Windows environment.
(The flow may differ depending on the computer or system configuration used.)
If necessary
If necessary
If necessary
For the procedure, refer to "3.3 Canceling or Checking the Status of Print Jobs"(P.39).
For the procedure, refer to "3.4 Ejecting the Remaining Print Data Forcibly"(P.42).
Start up the application used on the computer
For the startup procedure, refer to the manual that comes with the application.
Check settings of menu options
Before sending print data from the computer, perform the following checks:
1) Check the status of the port in use according to the Network/Port menu in the Common Menu.
2) Check the print mode of the port in use according to the Print Mode menu under the Network/Por
menu in the Common Menu.
For the procedure, refer to "7.2 Description of Common Menu" (P.258).
Specify printing from
an application
For the procedure, refer to the manual that comes with the application.
Cancel print jobs
Eject remaining print data forcibly
End
To Next Page
Loading...
Need help?
General
