6.5 List of Messages
235
Troubleshooting
6
Load Tray *
xxxx xxxx
Cause: Paper tray * is out of paper of size and orientation xxxx and
paper type XXXX.
Action: Load paper of size and orientation xxxx and paper type XXXX
in tray *.
“5.4 Loading Paper”(P.115)
Add paper-Tray *
xxxx xxxx
Cause: Paper tray * is out of paper of size and orientation xxxx and
paper type XXXX.
Action: Load paper of size and orientation xxxx and paper type XXXX
in tray *.
“5.4 Loading Paper”(P.115)
Check Tray *
xxxx xxxx
Cause: Paper tray * is not loaded with correct paper.
Action: Load paper of size and orientation of xxxx and paper type
XXXX in tray *.
“5.4 Loading Paper”(P.115)
Push in Tray * Cause: Paper tray * is drawn out.
Action: Set paper tray * correctly.
“5.4 Loading Paper”(P.115)
Check paper in Tray * Cause: Printing is not possible on the paper of the size loaded in tray *.
Action: Load the correct paper that allows printing.
“5.4 Loading Paper”(P.115)
Tray 1 - Check transparency Cause: Transparencies with white frame for colored printing is
loaded. This printer does not allow transparencies with white
frame foe colored printing.
Action: Use OPHP film without frame (V516).
“5.4 Loading Paper”(P.115)
Pull out Tray * Clear jam Cause: A paper jam has occurred in paper tray *.
Action: Remove the jammed paper in tray *.
“6.2 Clearing Paper Jams”(P.192)
Insert Drum U*##A* message
not found##
Cause: Drum cartridge A* is not set or is set incorrectly.
Action:
Set the drum cartridge correctly.
“5.5.3 Replacing Drum Cartridges [A1], [A2], [A3], and
[A4]”(P.137)
Message Cause/action
To Next Page
Loading...
