FujiFilm X-Pro2 - D Save Data Setting; Frame no; Save Org Image; Edit File Name

115
Menus
The Setup Menu
■ D SAVE DATA SETTING
FRAME NO.
FRAME NO.
New pictures are stored in image  les named using a four-digit  le number assigned by adding one to the
last  le number used. The  le number is displayed during playback as shown at right. FRAME NO. controls
whether  le numbering is reset to 0001 when a new memory card is inserted or the current memory card
is formatted.
Frame number
100-0001
Directory
number
File
number
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Numbering continues from the last  le number used or the  rst available  le number, whichever is higher. Choose
this option to reduce the number of pictures with duplicate  le names.
RENEW
RENEW Numbering is reset to 0001 after formatting or when a new memory card is inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P 143).
R Selecting D USER SETTING> RESET (P 108) sets FRAME NO. to CONTINUOUS but does not reset the  le number.
R Frame numbers for pictures taken with other cameras may di er.
SAVE ORG IMAGE
SAVE ORG IMAGE
Choose ON to save unprocessed copies of pictures taken using
F
F FLASH SETTING> RED EYE REMOVAL (P 98).
EDIT FILE NAME
EDIT FILE NAME
Change the  le name pre x. sRGB images use a four-letter pre x (default “DSCF”), Adobe RGB images a three-letter pre x (“DSF”)
preceded by an underscore.