FujiFilm X-Pro2 - Editing the Quick Menu

49
The Q (Quick Menu) Button
Using the Q Button
Editing the Quick Menu
Editing the Quick Menu
To choose the items displayed in the quick menu:
1
Press and hold the Q button during shooting.
SET END
SELECT CUSTOM SETTING
2
The current quick menu will be displayed; use the selector to highlight the item you wish to change
and press MENU/OK. You will be given the following choice of items to assign to the selected position:
• SELECT CUSTOM SETTING *
• DYNAMIC RANGE *
• WHITE BALANCE *
• NOISE REDUCTION *
• IMAGE SIZE
• IMAGE QUALITY
• FILM SIMULATION *
• GRAIN EFFECT *
• HIGHLIGHT TONE *
• SHADOW TONE *
• COLOR *
• SHARPNESS *
• SELF-TIMER
• FACE/EYE DETECTION SETTING
• PHOTOMETRY
• AF MODE
• FLASH MODE
• FLASH COMPENSATION
• MF ASSIST
• MOVIE MODE
• MIC LEVEL ADJUSTMENT
• EVF/LCD BRIGHTNESS
• EVF/LCD COLOR
• SHUTTER TYPE
• NONE
* Stored in custom settings bank.
R Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected,
current settings are shown in the quick menu by the label BASE.
3
Highlight the desired item and press MENU/OK to assign it to the selected position.
R The quick menu can also be edited using D BUTTON/DIAL SETTING> EDIT/SAVE QUICK MENU (P 112).