133
Technical Notes
Optional Accessories
Grip belt
GB-001: GB-001 enhances the camera’s hold, allowing users to carry the camera rmly with just one hand.
Macro extension tubes
MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios.
Protective lters
PRF-39/PRF-43/PRF-52/PRF-58/PRF-62/PRF-67/PRF-72/PRF-77: Use to protect the lens.
Teleconverters
XF1.4X TC WR: Increases the focal length of the lens by about 1.4×.
Mount adapters
FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
Front lens caps
FLCP-39/FLCP-43/FLCP-52/FLCP-58/FLCP-62/FLCP-67/FLCP-72/FLCP-72 II/FLCP-77: Protect the front lens element when the lens is not in use.
Rear lens caps
RLCP-001: Protect the rear lens element when the lens is not attached to the camera.
Body caps
BCP-001: Cover the camera lens mount when no lens is attached.
instax SHARE printers
SP-1: Connect via wireless LAN to print pictures on instax lm.
To Next Page
Loading...
