139
Troubleshooting
Problems and Solutions
Problem
Solution
The ash does not re.
•
The ash can not be used at current settings
The ash can not be used at current settings
: See the list of the settings that can be used with the fl ash (
: See the list of the settings that can be used with the fl ash (
P
153).
•
The battery is exhausted
: Charge the battery (
P
19) or insert a fully-charged spare battery (
19) or insert a fully-charged spare battery (
P
20).
The ash does not fully
light the subject.
•
The subject is not in range of the ash
The subject is not in range of the ash
: Position the subject in range of the fl ash.
: Position the subject in range of the fl ash.
•
The ash window is obstructed
The ash window is obstructed
: Hold the camera correctly.
: Hold the camera correctly.
•
Shutter speed is faster than
Shutter speed is faster than
/
s
: Choose a slower shutter speed (
: Choose a slower shutter speed (
P
36, 38, 79).
Pictures are blurred.
•
The lens is dirty
: Clean the lens (
P
xi).
•
The lens is blocked
: Keep objects away from the lens.
: Keep objects away from the lens.
•
s
is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red
: Check focus before shooting (
: Check focus before shooting (
P
75).
Pictures are mottled.
•
Shutter speed is slow and the ambient temperature is high
Shutter speed is slow and the ambient temperature is high
: This is normal and does not indicate a malfunction.
: This is normal and does not indicate a malfunction.
•
Pixel mapping is required
Pixel mapping is required
: Perform pixel mapping using
: Perform pixel mapping using
H
IMAGE QUALITY SETTING
>
PIXEL MAPPING
(
P
90).
•
The camera has been used continuously at high temperatures or a temperature warning is displayed
The camera has been used continuously at high temperatures or a temperature warning is displayed
: Turn the cam-
era off and wait for it to cool down.
era off and wait for it to cool down.
To Next Page
Loading...
