Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take no te of when working with your device.
Safety information
SafetyinformationNote
Please note the inform at
ion provided in the "Safety/regulations" m anual
and in th e following safe
ty notes.
When installing and ope
rating the device, please observe the no tes on
environmental conditi
ons in Ch apter "
Tech nical data", Page 53 as well as
the instructions i n Cha
pter "
Getti ng started", Page 11.
When setting up the dev
ice, make sure there is clearance all around it so that
thecasingreceives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on areas of the mon itor or the device.
You must only opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
The main switch (if
present) and the ON/OFF switch do not disconnect the
device from the ma
ins voltage. To completely disconnect from the mains
voltage, remove t
he power plug from the powe r socket.
Only opera te th
e device with the casing closed.
Replace the lit
hium battery on the mainboard in accordan ce with the instructions
in "
Repla cing t
he lithium battery", Page 52.
Caution, comp
onents in the system can get very hot.
The activiti
es described in these instructions must always be
performed wi
th the greatest care.
Repairs to th
e device must only be performed by qualified technicians.
Incorrect r
epairs could put the user at great risk or cau se serious dam age
to the equi
pment (electric shock, risk of fire).
Transpor
ting the device
Device,Trans po
rtation
Retrans
portation
Transport all parts separa tely in their original packaging or in a packaging which
protects them from knocks and jolts, t o the new site.
Do not unpack th em until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Fujitsu 7
To Next Page
Loading...
Need help?
General