Getting started
Operating position
You can use the device in a vert ical or horizontal operating position.
Vertical operating position
(optional)
Operation in the vertical o perating position is not allowed in Taiwan.
Proceed as follows to operate the device in t he vertical operating position:
Verticaloperatingpo
sition
Operatingpos ition,v
ertical
Rubber/plasticfeetSidecove r
► Disconnect the cables if required.
► Pull off the foil from the rubb er/plastic fee t included in the pack of accessories.
► Stick the rubber/plastic feet to the underside of the casing. In order to ensu re a
that the unit is stable, the rubber/plastic feet should be located in approximately
the positions shown in the illustration.
► Place the device vert ically on the rubber/plastic feet.
► If necessary, reconnect any cables that were previously disconnected.
Fujitsu 13
To Next Page
Loading...
