Getting s tarted
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order d escribed below.
Connecting t he cables
► Turn off all power and equipment switches.
CordCable,
► Remove all power plugs from th e grounded mains outlets.
► Connect all the cables to the device and the external d evices. Please make sure that you
always observe the safety notes provided in "
Important notes", Page 7.
► Plug all data communication cables into the appropriate sockets.
► Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to t he USB
ports", Page 19 and in the documentation for the USB devices.
Disconnecting the cables
► Sw itch off al
l affected devices.
Cable,
► Remove all power plugs from th e grounded mains outlets.
► Unplug all d
ata communication cables from th e appropriate sockets.
► Disconnect all of the cables from the device and from the external devices.
16 Fujitsu
To Next Page
Loading...
Need help?
General