Operation
Indicators on the device
Indicators,Device
The indicators are located on the front of the casing. Which indicators are available on
your device depends on the configuration level you have selected.
1 3 42
No. Indicator Description
1 Power indicator
Caution: When en
ergy saving mode is active, the device m ust
not be switch ed
off at the main power switch (if present) or
disconnected f
rom the mains, as this ma y result in data loss.
• The indicator i
s illuminated: The device is switched on.
• The indicator is flashing: The device is in energ y-saving
mode. After being switched on with the power button, the
device switches on or returns to the state it was in before the
energy-saving mode.
• The indicat
or is not illuminated: The device is disconnected
from the mai
ns or is ready. If the device is ready it can be
switched o
n with the ON/OFF switch.
2Harddiski
ndicator
The indicator lights up when th e hard disk drive of the device is
accessed.
3 Drive indicator The indicator lights up when the DVD drive in the device is being
accessed. Never remove the DVD while the indicator is illuminated.
4
SmartCard reader
indicator (optional)
The indicator is lit if a SmartCard reader is installed.
The indicator flashes when data is being exchanged.
Fujitsu 23
To Next Page
Loading...
Need help?
General